Scanning Documents in Different Sizes in One Batch (iX1300)
Scanning documents of different sizes in one batch is only available for U-turn Scan, in which a document is loaded in the ADF paper chute (cover) and scanned.
For details about documents that can be scanned with U-turn Scan, refer to Documents That Can Be Loaded Directly into iX1300 in the ScanSnap Help.
The procedure for scanning documents in different size in one batch is as follows.
-
Hold the right side of the ADF paper chute (cover) of the ScanSnap then open it or press the [Scan] button to turn it on.
Open the ADF paper chute (cover) fully so that the [Scan] button lights up in blue.
When the ADF paper chute (cover) is opened, the extension will rise automatically.
-
Tap the [Settings] button (for iPhone/iPod touch,
) on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.
The [Settings] screen appears.
-
Tap [Profile] in the [Settings] screen.
Available profiles appear.
- In [Paper], select [Auto] in [Paper size].
- Tap the [Back] button to return to the [File List] screen or the folder screen with the ScanSnap Sync function set to on.
-
Load documents in the ScanSnap.
Align the edge and the center of the documents.
Load the documents face-down and top-first with the front of the first document facing you.
The pick roller feeds the documents. Load all documents over one another above the pick roller (center). Documents that are not loaded above the pick roller cannot be fed.
Adjust the side guides to the widest document. Load smaller documents so that they can be scanned straight. If the documents are skewed during scanning, the following problems may occur:
Part of the document does not appear in the scanned image
Slant lines appear in the scanned image
The size of the scanned image is different from the size of the document
ATTENTIONAutomatic image rotation is not available when scanning with ScanSnap Connect Application.
-
Perform a scan.
Tap the [Scan] button on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.
A message appears indicating that the file is being received.
The received file will appear on the [File List] screen or the [Files] screen.
HINTWhen [Continuous Scan] is selected for [Feed (ADF)] under [Scanning] in [Profile], after scanning is complete, a message appears asking you whether to continue scanning or not.
Load documents in iX1300. Then, tap the [Continue] button to continue scanning.
To end the scan, press the [Exit] button on ScanSnap Connect Application.
To save the received file in the photo album, set [Save to photo album] to on (in the [File format] screen from [Profile]).
In the photo album, confirm that the image data meets your requirements.
To save the received file in the Files app, set [Save to the Files app] to on (in the [File format] screen from [Profile]).
In the Files app, confirm that the image data meets your requirements.
When the ScanSnap Sync function is set to on, the received file is uploaded to a synced cloud service automatically if you set [Auto Upload] to on in [ScanSnap Sync Setting] and an Internet connection is established.
-
Tap the received file on the [File List] screen or the [Files] screen.
The [Preview] screen appears.
-
Confirm that the image data meets your requirements.
HINT
You can send and view the received file in another application. When the ScanSnap Sync function is set to on, the received file can be uploaded to a cloud service.
The scanned data will be discarded if you exit ScanSnap Connect Application during scanning.
When a notification occurs such as an e-mail alert, alarm or power shortage, a mobile device connected to iX1300 will be disconnected and scanning will be canceled.
In this case, you can keep the scanned data created before the disconnection, however, you cannot continue scanning the rest of the document.
Up to 1,000 pages can be created for a single PDF file.
Scanning using the Carrier Sheet, Photo Carrier Sheet, or Booklet Carrier Sheet is not available.
If you use ScanSnap Manager on your computer, use ScanSnap Manager to scan a document placed inside the Carrier Sheet. You can receive the file or download the file to your mobile device in the following procedure.
Use Scan to Mobile to receive the file
Use the ScanSnap Sync function to download the file that is saved in ScanSnap Organizer
Do not close the application while receiving a file. Doing so may slow down the next startup because the [File List] screen or the folder screen with the ScanSnap Sync function set to on takes time to reload.
If the documents are not scanned straight, it is recommended that you scan documents one sheet at a time.