Scanning Multiple Documents Continuously

When you scan multiple documents with the ScanSnap, you can scan one or two document at a time. To scan two documents at a time, you can insert two documents at a time or you can insert the next document while another document is being scanned.

• Scanning one document at a time

  After scanning a document is completed, when you insert the next document in the ScanSnap, the next scan is started automatically.

  For details, refer to Scanning Documents (iX100).

  
• Scanning documents by inserting two documents at a time or by inserting the next document while the current document is being scanned (dual scan)

  When scanning small size documents such as business cards and postcards, you can insert two documents at a time in the ScanSnap. Alternatively, you can insert the next document while another document is being scanned. In either method, you can scan up to 20 documents continuously in a single scanning operation.

  These scanning methods are referred to as dual scans.

  For details, refer to Scanning Documents by Inserting Two Documents at a Time or by Inserting the Next Document While the Current Document Is Being Scanned (iX100).

  

Scanning Documents Larger Than A4 or Letter Size by Directly Inserting Them in the ScanSnap

By folding an A3, B4, or Double Letter size document in half and scanning each side continuously, the scanned images of both sides can be automatically merged into a single image.

Scanned images can be merged only when there is text, diagram, or a table on the fold line of the folded document.

For details, refer to Scanning Documents Larger Than A4 or Letter Size by Directly Inserting Them in the ScanSnap (iX100).

Scanning Documents That Cannot Be Loaded Directly in the ScanSnap

You can use the optional Carrier Sheet to scan the following documents.

• Documents that are larger than A4/Letter size and not larger than A3 size

  For details, refer to Scanning Documents Larger than A4 or Letter Size with the Carrier Sheet (iX100).

  
• Documents that can be damaged quite easily such as photographs, or non-standard size documents such as clippings

  For details, refer to Scanning Documents Such as Photographs and Clippings (iX100).

  

Connecting the ScanSnap via Wireless LAN

You can connect the ScanSnap and a computer or mobile device via wireless LAN.

To connect them, you can use either the Access Point Connect mode in which a wireless access point is used for connection or the Direct Connect mode in which a computer or mobile device is directly connected to the ScanSnap. Select a suitable connection mode depending on whether there is wireless LAN in a place where you use the ScanSnap or not.

To configure the wireless settings for the ScanSnap, use the ScanSnap Wireless Setup Tool, which is installed together with ScanSnap Manager.

For details, refer to Connecting the ScanSnap via Wireless LAN (iX1300 / iX500 / iX100).

• Access Point Connect mode
  
• Direct Connect mode