Using a DNS Server for the Internet Connection

When an IP address is set for the ScanSnap, the setting for using a DNS server can be configured on the ScanSnap.

  1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
  2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
  3. Press [Access point connection] to display the [Access point connection] screen.
  4. Press [DNS Server] to display the [DNS Server] screen.
  5. Turn on [Use of DNS Server].
  6. Press the input field for [Primary DNS], enter the IP address of the primary DNS server, and then press [OK].
  7. Press the input field for [Secondary DNS], enter the IP address of the secondary DNS server, and then press [OK].
  8. Press Home to return to the home screen.

A DNS server is set for the ScanSnap