Inaccessible to the Network (The Wireless Access Point Is Wrong)
- Cause
-
The wireless access point that is set for the ScanSnap is different from the one that is set for the mobile device.
- Solution
-
Set the same wireless access point for the ScanSnap and the mobile device.
When a wireless access point that is set for the ScanSnap is wrong
Select [Reconfigure ScanSnap], and then set up the ScanSnap from the beginning.
When a wireless access point that is set for the mobile device is wrong
Select [Reconfigure the mobile device], and then reconfigure the Wi-Fi settings for the mobile device.
ATTENTIONIf more than one wireless access point is available, make sure you do not select another SSID by mistake.
One wireless access point may have more than one SSID (multi-SSID function), depending on the type. In this case, select the network name that is called basic SSID, main SSID, or owner SSID. Do not select the network name that is called the guest SSID or WEP SSID. To check whether the wireless access point is equipped with a multi-SSID function, refer to your wireless access point manual.