Connecting to a Computer
To receive PDF/JPEG images scanned with the ScanSnap, you need to connect the mobile device to a computer.
The computer can be connected to your mobile device only when you are using ScanSnap Manager on the computer.
When you start ScanSnap Connect Application, the computer and the mobile device will be connected automatically.
If the connection is not established or you want to change the computer to connect to, perform one of the following:
Selecting from [Connect to]
Specifying the IP address
While searching for or connecting to a computer, the auto-lock on the mobile device will be disabled temporarily.
It is recommended to exit ScanSnap Connect Application or manually lock the mobile device once the operation is completed.
No computer may be detected when communication between wireless devices is disabled by an option such as privacy separator.
In that case, change the setting on the wireless access point to allow communication between wireless devices.
For the setting on the wireless access point, refer to the manual of the wireless access point that you are using.
Only one computer can be connected by a mobile device at a time.
Only one mobile device can be connected to the computer at a time.