Specifications of Wireless LAN (iX100)

The following table summarizes the wireless LAN specifications of iX100.



Product name

ScanSnap iX100

Observed standards


Frequency range

2.412 GHz to 2.472 GHz


Access Point Connect mode: 1 to 13 ch

Direct Connect mode: 1 to 11 ch

Transfer speed (standard)

IEEE802.11b Max.: 11 Mbps

IEEE802.11g Max.: 54 Mbps

IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz bandwidth) (*1)

Communication mode

Access Point Connect mode (infrastructure) (*2)

Direct Connect mode (access point)

Communication distance (line of sight)

Indoors, 50 m (Recommended: indoors, within 25 m) (*3)


Access Point Connect mode

WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA (TKIP/AES), WPA2 (TKIP/AES), WEP (64-bit/128-bit) (*4)

Direct Connect mode

WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (64-bit/128-bit)

Easy installation

WPS 2.0 supported (button/PIN code) (*5)


The values indicated on these standards are the maximum value, and do not indicate actual communication speed.


To use the wireless function, you need a wireless access point that supports the same standards.


The specifications may vary based on the connected wireless access point and the surrounding environment.


The following EAP types are supported.


EAP-MD5 is not supported by iX100 if the last six digits of the serial number are "E00001" or later. It is recommended that you change to a more secure security protocol.


You need a wireless access point or wireless client that supports the WPS function.


For a wireless access point that cannot disable a privacy separator such as a mobile router or a public wireless LAN, a connection between iX100 and a computer cannot be established.