Documents That Can Be Loaded Directly into iX100

Conditions for documents that can be loaded directly into iX100 are as follows:

Eject method (*1)

With the output guide closed

With the output guide open

Document type

Office paper, postcards, business cards

Plastic cards conforming to the ISO7810 ID-1 type (54 × 86 mm/3.37 × 2.13 in.) (*2)

Office paper

Paper weight

52 to 209 g/m2 (14 to 56.1 lb)

When merging scanned images automatically

52 to 105 g/m2 (14 to 28 lb)

For plastic cards

0.76 mm (0.03 in.) or less (embossed cards can be used)

52 to 80 g/m2 (14 to 21 lb)

Paper size
Width

25.4 to 216 mm (1 to 8.5 in.)

For a dual scan, a total width of 200 mm (7.87 in.) or less for two documents

Length

25.4 to 863 mm (1 to 34 in.)

When merging scanned images automatically (*3)

  • A3 (297 × 420 mm/11.7 × 16.5 in.)

  • B4 (257 × 364 mm/10.1 × 14.3 in.)

  • Double Letter (11 × 17 in. (279.4 × 432 mm))
*1:

For details about the eject methods, refer to Parts and Functions (iX100).
*2:

A dual scan cannot be used for plastic cards.
*3:

Scan a document folded in half.
ATTENTION
  • The following types of documents must not be scanned:

    • Documents attached with the metals such as paper clips or staples that can damage the inside of iX100

      Remove the metals for scanning.

    • Documents on which the ink is still wet

      Wait until the ink dries completely to scan these documents.

    • Documents larger than 216 × 360 (mm)/8.5 × 14.2 (in.) (width × length)

    • Documents other than paper such as fabric, metal foil and OHP film

  • When you scan picture postcards, be aware that the picture side may get damaged. It is the responsibility of the customer to scan picture postcards.

  • Be careful of the following when you scan plastic cards:

    • Cards that are bent may not be fed properly.

    • If the surface of the card is dirty with grease marks such as fingerprints, perform scanning after wiping the dirt off.

    • Insert the plastic card straight into the feeding section of iX100. Do not tilt the plastic card when you insert it because the plastic card may not be fed properly.

    • When you scan plastic cards with strong luster, some parts of the image may appear lighter or darker than the original.

      Example:

      gold colored credit card

    • When you want to scan embossed cards, insert them in iX100 in the following direction.

      Inserting Direction for Embossed Cards
HINT

If you use ScanSnap Manager on your computer, place documents that are larger than A4/Letter size or documents that can be damaged quite easily (such as photographs and clippings) inside the Carrier Sheet and then scan the documents with ScanSnap Manager. You can receive the file or download the file to your mobile device in the following procedure.

  • Use Scan to Mobile to receive the file

  • Use the ScanSnap Sync function to download the file that is saved in ScanSnap Organizer

For details about documents that can be scanned with the Carrier Sheet, refer to the ScanSnap Basic Operation Guide.