Checking the MAC address of the ScanSnap

Check the MAC address of the ScanSnap on the touch panel.

  1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
  2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
  3. Check that [Wi-Fi connect mode] is set to [Access point connection] or [Direct connection].

    If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access point connection] or [Direct connection]

  4. Press [Wi-Fi information] to display the [ScanSnap information] screen.
  5. Check the [MAC address] in the [Network] tab.