Connecting the ScanSnap and the Computer by Entering the Information of a Wireless Access Point

To connect the ScanSnap and a computer via Wi-Fi, you need to connect the ScanSnap and the computer to the same wireless access point. Enter the wireless access point information (such as the network name and security), and connect the ScanSnap to the wireless access point.

After the ScanSnap is connected to the wireless access point, you can use the ScanSnap with the computer.

  1. Set [Wi-Fi connect mode] to [Access point connection] for the ScanSnap.
    1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
    2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
    3. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
    4. Select [Access point connection].
    5. Press Back to return to the [Wi-Fi settings] screen.
    6. Press Back to return to the [Wi-Fi settings] screen.
  2. Connect the ScanSnap to a wireless access point.
    1. Press [Access point connection] to display the [Access point connection] screen.
    2. Press [Access point connect settings] to display the [Connection information configuration method] screen.
    3. Select [Configure manually].
    4. Press the [Next] button to display the [Enter connection information] screen.
    5. Enter the information of the wireless access point to be used and press the [Next] button.

      The items which are displayed in the screen differ depending on the security protocol of the wireless access point.

    6. Press the [Complete] button in the [Check Connection Results] screen.
    7. Press Home to display the home screen.

The computer and the ScanSnap are connected via Wi-Fi using the same wireless access point.