Connecting the ScanSnap and the Mobile Device Via a Specified Wireless Access Point

To connect the ScanSnap and a mobile device via Wi-Fi, you need to connect the ScanSnap and the mobile device to the same wireless access point. From the list of wireless access points detected by the ScanSnap, select a wireless access point, and connect the ScanSnap to the wireless access point.

After you connect the ScanSnap and the wireless access point, use the application that you installed on the mobile device to connect the ScanSnap and the mobile device.

  1. Set [Wi-Fi connect mode] to [Access point connection] for the ScanSnap.
    1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
    2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
    3. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
    4. Select [Access point connection].
    5. Press Back to return to the [Wi-Fi settings] screen.
    6. Press Back to return to the [Wi-Fi settings] screen.
  2. Connect the ScanSnap to a wireless access point.
    1. Press [Access point connection] to display the [Access point connection] screen.
    2. Press [Access point connect settings] to display the [Connection information configuration method] screen.
    3. Select [Select an access point].
    4. Press the [Next] button to display the [Select network] screen.
    5. From the list of displayed wireless access points, select a wireless access point that you want to connect to.
    6. Press the [Next] button to display the [Enter connection information] screen.
    7. Enter the information of the wireless access point to be used and press the [Next] button.

      The items which are displayed in the screen differ depending on the security protocol of the wireless access point.

      • To perform the authentication with a security key

        Press the input field for [Security key] and enter the user name, and then press [OK].

      • To perform the authentication with a client certificate

        Press [Client certificate] and select the certificate to be used.

        HINT
        • To check the details about the certificate, press the [Certificate] button.

      • To perform the authentication with a user ID and a password

        Press the input field and enter a value for [User ID] and [Password] respectively, and then press [OK].

      • To perform the authentication with an external ID

        Press the input field for [External ID], enter the external ID, and press [OK].

    8. Press the [Complete] button in the [Check Connection Results] screen.
    9. Press Home to display the home screen.
  3. Check the scanner name of the ScanSnap.
    1. Press Settings to display the [Settings] screen.
    2. Press Connecting Devices to display the [Connecting Devices] screen.
    3. Check the scanner name that is displayed in [Scanner name].
  4. Start up an application on a mobile device, and connect the mobile device to the ScanSnap by using a wireless access point.

    For details about how to connect the mobile device to the ScanSnap, refer to the manual of the application.

    For details about the application that is used on the mobile device, refer to Application Required for a Mobile Device.