Connecting the ScanSnap and a Mobile Device Directly by a Direct Connection

When you cannot establish a connection to a wireless access point, use a direct connection so that the ScanSnap and a mobile device are directly connected via Wi-Fi.

  1. Set [Wi-Fi connect mode] to [Direct connection] for the ScanSnap.
    1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.
    2. Press Wi-Fi settings to display the [Wi-Fi settings] screen.
    3. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
    4. Select [Direct connection].
    5. Press Back twice to display the [Settings] screen.
    6. Press Back twice to display the [Settings] screen.
  2. Connect the ScanSnap and a mobile device directly by using a direct connection.
    1. Press Connecting Devices to display the [Connecting Devices] screen.
    2. Open the screen for setting the Wi-Fi function on the mobile device.
      HINT
      • For details, refer to the manual of the mobile device.

    3. Enter the network name (SSID) and security key that are displayed in the [Connecting Devices] screen in the window for setting the Wi-Fi function.
    4. Start up an application on the mobile device, and connect the ScanSnap and the mobile device directly.

      For details about how to connect the mobile device to the ScanSnap, refer to the manual of the application.

      For details about the application that is used on the mobile device, refer to Application Required for a Mobile Device.