Initializing Profiles on the ScanSnap

Initialize profiles that are managed on the ScanSnap.

If you initialize profiles that are managed on the ScanSnap, the profiles will not be deleted completely because information of the profiles are manged in ScanSnap Home.

Therefore, when you connect the ScanSnap with a computer, the ScanSnap is synchronized with ScanSnap Home, and the profiles are displayed again on the touch panel of the ScanSnap.

For the procedure to initialize profiles that are managed in the ScanSnap, refer to the following.

  1. Press Settings in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.

  2. Press Scanner settings to display the [Scanner settings] screen.

  3. Press [Initialize profiles].

  4. Press the [Initialize] button.

The profiles that are managed in the ScanSnap are initialized.