The Image Is Skewed

Did the document skew during scanning?

When you load the documents, adjust the side guides to the width of the documents.

Hold each side guide in the middle to adjust them. Otherwise, the documents may be fed skewed.

Adjusting the Side Guides
Adjusting the Side Guides
Adjusting the Side Guides

Feeding documents becomes easier with the Receipt Guide.

For details about how to attach the Receipt Guide, refer to Attaching the Receipt Guide.

Did you insert the document at a skewed angle in the ScanSnap?

Insert the document straight into the feeding section of the ScanSnap.

Make sure that the document is fed into the ScanSnap and is held firmly.

Inserting a Document
Inserting a Document

Did you scan documents of different widths and lengths in the same batch?

Perform one of the following:

  • Align the top of the documents, and load them in the ADF paper chute (cover) as the leading edge. Make sure that all documents are set to the center of the pick roller's width.

    Also, adjust the side guides to the widest document in the batch. Load the other documents so that they can be scanned straight.

    For details, refer to Scanning Documents of Different Sizes in One Go.

  • Change the feed mode setting to [Continuous scan] in the procedure below. Then, divide the documents into batches with the same width to load them separately and then scan them.

    1. On the touch panel of the ScanSnap, select the profile that you are using from the profile list in the home screen.

    2. Press the feed mode setting icon and change the feed mode setting to [Continuous scan].

    If you change the scan settings on the touch panel, and scan a document, after it is scanned the scan settings will return back to the settings before any changes are made. If you want to scan documents under the same settings all the time, the scan settings need to be saved as a profile.

  • Use the Receipt Guide to perform a scan.

    For details about how to attach the Receipt Guide, refer to Attaching the Receipt Guide.

Perform one of the following:

  • Align the top of the documents, and load them in the ADF paper chute (cover) as the leading edge. Make sure that all documents are set to the center of the pick roller's width.

    Also, adjust the side guides to the widest document in the batch. Load the other documents so that they can be scanned straight.

    For details, refer to Scanning Documents of Different Sizes in One Go.

  • Change the feed mode setting to [Continuous scan] in the procedure below. Then, divide the documents into batches with the same width to load them separately and then scan them.

    Windows
    1. Click the [Scan] button in the upper left of the main window of ScanSnap Home to display the scan window.

      If the main window is not already displayed, refer to To Display the Main Window.

    2. Select the profile that you are using from the profile list.

    3. Click the feed mode setting icon and change the feed mode setting to [Continuous scan].

    Mac OS
    1. Click the [Scan] button in the upper left of the main window of ScanSnap Home to display the scan window.

      If the main window is not already displayed, click the [ScanSnap Home] icon ScanSnap Home Icon in the application list that appears when you click Launchpad in the Dock.

    2. Select the profile that you are using from the profile list.

    3. Click the feed mode setting icon and change the feed mode setting to [Continuous scan].

     

    If you change the scan settings in the scan window and scan a document, after it is scanned the scan settings will return back to the settings before any changes are made. If you want to scan documents under the same settings all the time, the scan settings need to be saved as a profile.

Have you selected the [Deskew by document text] checkbox in the scan settings?

Depending on the contents of the document, the skewed image may not be corrected properly.

The image may be skewed when you scan the following types of documents:

  • Documents on which pitches between lines or characters are extremely narrow, or characters are overlapped

  • Documents with many outlined or decorated characters

  • Documents with many photographs or figures and few characters

  • Documents with characters on a patterned background

  • Documents with characters printed in various directions such as drawings

  • Documents with long diagonal lines

  • Documents with handwritten characters

Clear the [Deskew by document text] checkbox in the following procedure:

Windows
  1. Click the [Scan] button in the upper left of the main window of ScanSnap Home to display the scan window.

    If the main window is not already displayed, refer to To Display the Main Window.

  2. Select the profile that you are using from the profile list.

  3. Click Edit profiles to display the [Edit profiles] window.

  4. Click the [Detailed settings] button in [Scan settings] to display the [Detailed settings] window.

  5. Click the [Option] button in the [Scan] tab to display the [Scanning options] window.

  6. Clear the [Deskew by document text] checkbox.

Mac OS
  1. Click the [Scan] button in the upper left of the main window of ScanSnap Home to display the scan window.

    If the main window is not already displayed, click the [ScanSnap Home] icon ScanSnap Home Icon in the application list that appears when you click Launchpad in the Dock.

  2. Select the profile that you are using from the profile list.

  3. Click Edit profiles to display the [Edit profiles] window.

  4. Click the [Detailed settings] button in [Scan settings] to display the [Detailed settings] window.

  5. Click the [Option] button in the [Scan] tab to display the [Scanning options] window.

  6. Clear the [Deskew by document text] checkbox.

 

Did you adjust the side guides to the width of the document?

When you load the document, adjust the side guides to the width of the document.

Hold each side guide in the middle to adjust them. Otherwise, the document may be fed skewed.

Adjusting the Side Guides
Adjusting the Side Guides
Adjusting the Side Guides