Setting Up the ScanSnap That You Purchased as a Replacement or as an Additional Scanner

This section explains how to set up the ScanSnap that you purchased as a replacement or as an additional scanner, so that it is ready to scan with ScanSnap Home, when one of the ScanSnap models (ScanSnap iX500, ScanSnap iX100, ScanSnap SV600, ScanSnap S1300i, ScanSnap S1100i, or ScanSnap S1100) has already been set up.

Uninstall ScanSnap Manager if it is installed on a computer.

Also, note that if you install ScanSnap Home on a computer, all of the following software applications are uninstalled.

  • ScanSnap Organizer

  • CardMinder

  • ScanSnap Receipt

  • ScanSnap Connect Application

  • ScanSnap Cloud

HINT

The following preparations are required before you set up the ScanSnap.

ATTENTION
  • Do not connect the ScanSnap to the computer before installing the software.

  • Check that all items are included in the package

    For details, refer to Package List.

    For details, refer to "Package List" in Getting Started that is supplied with the scanner.

    HINT
    • When Getting Started is included in the package, refer to "Package List" in Getting Started.

  • Remove the protective inner cover and tape (1) and the cardboard sheet (2) from the ScanSnap

    Removing the Materials Used for Protection
    • The data on the card may be lost if the black magnetic part of a magnetic card or IC card is in contact with the magnetic part (3).

  • Remove the tape seal (1) and tape (2) from the ScanSnap

    Removing the Materials Used for Protection
  • Remove the tape (1) and tape seal (2) from the ScanSnap

    Removing the Materials Used for Protection
  • Remove the tape seal (1) from the ScanSnap

    Removing the Materials Used for Protection
  • Remove the tape seal (1) and tape (2) from the ScanSnap

    Removing the Materials Used for Protection
  • Connect the ScanSnap and the computer with a USB cable, and charge the battery until the battery indicator light turns off

    Charging the ScanSnap
    ATTENTION
    • Do not open the feed guide until the instructions are displayed on the window for installing software.

    • The ScanSnap can be charged with the supplied USB cable or optional USB power adapter. For purchasing details of the USB power adapter, refer to "Suppliers of Consumables/Optional Parts" in Customer Support.

  • Attach the extenders to the ScanSnap

    ATTENTION
    • The following preparations are required before you attach the extenders.

      • Wipe off dust and dirt such as oily dirt on the place where the extenders will be attached

      • Peel the protective tape off the bottom of the extenders

    Leaving about 3 to 5 mm of space between the extenders and the back and side of the ScanSnap, push the extenders down until they lock in place. If the extenders are placed against the side of the ScanSnap base or the protrusion of the extenders are placed on the ScanSnap base, the bottom of the extenders may not stay in place firmly.

    Attaching the Extenders

The procedure to set up the ScanSnap is as follows:

  1. Downloading the Software

  2. Installing the Software/Connecting the ScanSnap

21 Downloading the Software

On your computer or mobile device, download the software from here.

Select the appropriate software to download depending on your operating system.

To set up the ScanSnap by using a mobile device, refer to Using the ScanSnap with a Mobile Device.

On your computer, download the software from here.

Downloading the ScanSnap Software
32 Installing the Software/Connecting the ScanSnap
  1. Run the installer that you saved on your computer.

  2. When the [ScanSnap Home Setup] window (Welcome to ScanSnap Home Setup) appears, click the [Next] button to start installing the software.

    Follow the instructions to install the software.

    Welcome to ScanSnap Home Setup
  3. The window for selecting a model to be connected appears after the installation is complete, select a ScanSnap model that you want to connect and then click the [Start setup] button.

    Select a scanner to be connected
  4. When the [ScanSnap Home - Connecting ScanSnap] window (Connect the ScanSnap to your computer) is displayed, follow the instructions on the window to connect the ScanSnap to a computer via a USB cable and click the [Next] button.

    HINT
    • If you cannot connect a USB cable to a computer, click [If you cannot connect the USB cable to the computer, refer to this link] displayed in the lower left of the [ScanSnap Home - Connecting ScanSnap] window (Connect the ScanSnap to your computer), and follow the instructions on the window to connect the ScanSnap to the computer via Wi-Fi.

      The default scanner name of the ScanSnap is "ModelName-<Serial No.>".

      To connect the ScanSnap and a computer via Wi-Fi, you need to connect the computer and the ScanSnap to the same wireless access point.

  5. When the [ScanSnap Home - Connecting ScanSnap] window (How to connect ScanSnap) is displayed, follow the instructions on the window to connect the ScanSnap to a computer via a USB cable and click the [Next] button.

    • Do not use a cable other than the supplied one to connect to the ScanSnap. Using other cables may cause a scanner failure.

  6. Turn on the ScanSnap and click the [Next] button.

  7. When the "Connection is complete" window appears, click the [Next] button.

    Connection is complete
  8. When the "ScanSnap has been connected successful." window appears, click the [Finish] button.

    ScanSnap Has Been Connected Successfully
  9. The window for checking whether to configure the Wi-Fi settings for the ScanSnap is displayed.

    Wi-Fi connection
    ATTENTION
    • To connect the ScanSnap and a computer via Wi-Fi, the computer must be already connected to the wireless access point that you want to connect the ScanSnap to.

    Click the [Yes] button.

    When the wireless network setup wizard appears, follow the instructions on the window to connect the ScanSnap to a wireless access point.

    USB cable connection

    Click the [No] button.

    The Wi-Fi settings for the ScanSnap can be configured later.

    For details, refer to Connecting the ScanSnap and the Computer Via a Specified Wireless Access Point.

  10. When the [ScanSnap wireless network setup] window appears, select whether to configure the Wi-Fi settings for the ScanSnap.

    Wi-Fi connection
    ATTENTION
    • To connect the ScanSnap and a computer via Wi-Fi, the computer must be already connected to the wireless access point that you want to connect the ScanSnap to.

    Click the [Setup now] button.

    When the wireless network setup wizard appears, follow the instructions on the window to connect the ScanSnap to a wireless access point.

    USB cable connection

    Click the [Later] button.

    The Wi-Fi settings for the ScanSnap can be configured later.

    For details, refer to Configuring the Wi-Fi Settings.

  11. When the [ScanSnap Home - Connecting ScanSnap] window (Let's use it!) appears, check the contents and click the [Close] button.

The scanner name of the connected ScanSnap is displayed in [Select a scanner] in the Scan Window.

The scan window appears when you click the [Scan] button in the upper left of the Main Window of ScanSnap Home.

Checking the Scanner
Checking the Scanner

The window varies depending on the ScanSnap to be connected.

ScanSnap Home allows you to register your favorite scan settings for the ScanSnap as a profile (1).

Multiple user-friendly profiles are available by default. For details, refer to Default Profiles.

Profiles are displayed both on the touch panel of the ScanSnap and in the scan window of ScanSnap Home.

On the touch panel of the ScanSnap or in the scan window of ScanSnap Home, select a profile, and press the [Scan] button to perform a scan.

In the scan window, select a profile, and click the [Scan] button to perform a scan.

HINT