Preparations for Connecting the ScanSnap via Wireless LAN (iX1300 / iX500 / iX100)

To connect the ScanSnap via wireless LAN, prepare the following:
  • An environment in which a wireless LAN is available

    To connect the ScanSnap and a computer or a mobile device in Access Point Connect mode, prepare the wireless LAN environment.

    When connecting the ScanSnap to a wireless access point, you may need information such as an SSID (network name) and a security key (password).

    For details, refer to the manual for the wireless access point.

    ATTENTION
    • Do not place the following within 100 mm (3.9 in.) of the ScanSnap, or near your wireless access point.
      • Obstacles that block radio waves (such as walls and metal plates)
      • Devices that may cause signal interference (such as microwaves and cordless phones) and wireless devices
    • If the wireless access point has two types of SSID (2.4 GHz and 5 GHz) when you connect iX500/iX100 to the wireless access point, the 2.4 GHz SSID needs to be used.
  • ScanSnap Connect Application

    To connect the ScanSnap and a mobile device, you need to install ScanSnap Connect Application on your mobile device.

    Download ScanSnap Connect Application for the mobile device from the following application stores:

    • App Store
    • Google Play
    • Amazon Appstore
    HINT

    To connect iX1300 with a mobile device, you can establish a connection between the ScanSnap and a mobile device by following the instructions in the wizard that appears after installing ScanSnap Connect Application.

    For details about how to operate ScanSnap Connect Application, refer to the Basic Operation Guide (Mobile Connection).