Filling in Fingers Captured in a Scanned Image (When a Document Is Scanned)(SV600)

Fingers that are captured when a document is scanned can be filled in.

ScanSnap Manager - Overview Figure
ATTENTION
  • Do not hold the corners of the document when you scan.

    If you do so, the shape of the image may not be recognized correctly.

  • To fill in fingers captured in the scanned image, the fingers need to be detected.

    If a document is scanned in the following ways, captured fingers may not be detected correctly.

    • When two or more fingers that are used to hold down a document to be scanned are touching each other (Figure 1)
    • When you hold down a document to be scanned with manicured fingers or fingers with artificial nails (Figure 2)
    • When you hold down a document to be scanned with your fingers bent (Figure 3)
    • When fingers that are used to hold down a document to be scanned are captured 1 cm (0.39 in.) or more (Figure 4)
    • When there is text or an image within 5 mm (0.2 in.) around the fingers that are used to hold down a document to be scanned (Figure 5)
    • When a document that has a background color other than white is scanned (Figure 6)
    • When a document is scanned after [Gray], [B&W], or [Color high compression] is selected from the [Color mode] drop-down list in the [Scanning] tab of the ScanSnap Setup Window
    Examples of When Captured Finger Images Cannot Be Detected Correctly
HINT
  • Up to five fingers on each side (top/bottom/right/left) of the document can be filled in.
  • To prevent image deterioration, select and fill in as many fingers as possible in one go.
  1. On the window that appears after a document is scanned, select [Crop and save flat document images as-is] and click the [Check/Correct] button.

    For details about how to perform a scan, refer to Scanning Documents (SV600).

    ScanSnap Manager - Image scanning and file saving
    • The [ScanSnap Manager - View cropped images] window is displayed.
  2. Select a scanned image to fill in fingers captured in the image.
  3. Select the [Continue with Point Retouch] checkbox and click the [Next] button.
    HINT

    The orientation of the scanned image and the crop area cannot be corrected in the [ScanSnap Manager - Book Image Viewer] window. Modify them in the [ScanSnap Manager - View cropped images] window beforehand.

    ScanSnap Manager - Image scanning and file saving
    • The [ScanSnap Manager - Book Image Viewer] window appears in the point retouch mode.
  4. Click on a finger captured in a scanned image with the mouse.
    • When a finger is detected, it is indicated with a red dashed outline.

      To change a range of the outline, drag the white dot on the outline.

      Point Retouch Mode
      HINT

      When a finger captured in a scanned image is not detected, a default outline is displayed around the finger.

      In that case, drag the white dot on the outline to align the outline with the shape of the finger.

      Point Retouch Mode
  5. Click the [Apply] button.
    • The finger captured in a scanned image is filled in.

      When you have completed filling in the captured finger, click the [Save and Exit] button.