Correcting the Scanned Image Orientation (SV600)

The orientation of scanned images that are skewed or upside-down can be corrected.
  1. On the window that appears after multiple documents are scanned at once, select [Crop and save flat document images as-is] and click the [Check/Correct] button.

    For details about how to perform a scan, refer to Scanning Multiple Documents at Once (SV600).

    ScanSnap Manager - Image scanning and file saving
    • The [ScanSnap Manager - View cropped images] window is displayed.
  2. Select which scanned image to correct the orientation for.
    ScanSnap Manager - View cropped images
  3. Click Rotate 90 degrees CCW or Rotate 90 degrees CW.
    • The scanned image is rotated by 90 degrees.
      ScanSnap Manager - View cropped images

      When you have completed correcting the orientation, click the [Save and Exit] button.

HINT
  • To fine-tune the orientation of the crop frame, select which scanned image you want to rotate and then perform one of the following operations:
    • Drag the green operating point that appears at the top of the crop frame by as little or as much as you want.
    • Click Rotate 0.5 degrees CCW or Rotate 0.5 degrees CW.
  • If the [Next] button is displayed, clear the [Continue with Point Retouch] checkbox. The [Next] button changes to the [Save and Exit] button.