Connecting the ScanSnap to a Wireless LAN (iX1300 / iX500 / iX100)

The ScanSnap Wireless Setup Tool is an application to configure the wireless settings required for connecting your ScanSnap via wireless LAN in a wizard format. The ScanSnap Wireless Setup Tool can be used to configure and check the following wireless LAN settings and connection.

  • Connecting the ScanSnap to a wireless access point
  • Registering the computer that will be connected to the ScanSnap via wireless LAN (iX500/iX100)
  • Setting the IP address, name, and password for the ScanSnap
  • Checking the connection between the ScanSnap and the computer (iX1300/iX100)
  • Checking the connection between the ScanSnap and the mobile device

Follow the procedure below to start the ScanSnap Wireless Setup Tool and configure the wireless settings.

  1. Start the ScanSnap Wireless Setup Tool.
    • Windows 11

      Select [Start] menu → [All apps] → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].

    • Windows 10

      Select [Start] menu → [ScanSnap Manager] → [ScanSnap Wireless Setup Tool].

    • The ScanSnap Wireless Setup Tool will start running.
  2. Click the [Wireless Network Setup Wizard] button Wireless Network Setup Wizard in the main menu.
    • The Wireless Network Setup Wizard appears.
  3. Follow the instructions in the Wireless Network Setup Wizard to configure the wireless settings.

    For iX1300/iX100, configure and check the wireless settings based on the wireless LAN environment in which the ScanSnap is used.

HINT
  • For details and operation of ScanSnap Wireless Setup Tool, refer to the ScanSnap Wireless Setup Tool Help.
  • The ScanSnap Wireless Setup Tool is also started up when the ScanSnap software is installed.