Connecting the ScanSnap to a Mobile Device in Access Point Connect Mode (iX1600 / iX1500)
Configure the wireless settings for the ScanSnap in the ScanSnap Wireless Setup Tool Wizard or on the touch panel to complete the preparation for connecting the ScanSnap to a mobile device.
For details, refer to the following:
- Connecting the ScanSnap to a Wireless Access Point by Using the ScanSnap Wireless Setup Tool (iX1600 / iX1500)
- Connecting the ScanSnap to a Wireless Access Point from the Touch Panel (iX1600 / iX1500)
The following explains how to connect the ScanSnap and a mobile device when the wireless settings for the ScanSnap have already been configured.
- Start ScanSnap Connect Application on your mobile device.
- The mobile device will automatically be connected to an available ScanSnap on the same network.
HINT- If more than one available ScanSnap is detected, or if ScanSnap Connect Application is set not to connect a mobile device to a ScanSnap automatically, then tap the ScanSnap that you want by name, in order to connect to the mobile device, under [ScanSnap] on the [Connect to] screen. For details, refer to the Basic Operation Guide (Mobile Connection) for your mobile device.
- A notification window notifies you in the following cases:
- When the ScanSnap and the mobile device are connected via wireless LAN, and the communication with ScanSnap Manager is disconnected
- When you log into the computer which is connected to the ScanSnap with the ScanSnap and the mobile device already connected via wireless LAN