Parts and Functions of S1100i

This section explains the names and functions of the ScanSnap parts.

Front

Front
No. Name Description
1 Feed guide Open it to use the ScanSnap.

Opening it turns on the ScanSnap. Then, you can place a document on it to insert the document.
2 Output guide Open it to eject documents from the front of the ScanSnap.

Select an ejection method depending on the document type you are scanning.

For details about documents that can be scanned with the ScanSnap, refer to Documents to Scan (S1100i).

  • When the output guide is closed
    When the Output Guide Is Closed
  • When the output guide is open
    When the Output Guide Is Open
3 Top cover Open it to remove jammed documents or clean the inside of the ScanSnap.

For details about how to clean the inside of the ScanSnap, refer to Cleaning the Inside of S1100i.
4 [Scan/Stop] button Press this button to start or finish scanning.

Indicates the status of the ScanSnap as follows:

Blue (lit): Ready

Blue (flashing): Scanning

Orange (flashing): Error
5 Feeding section Insert the document here to load.

Side

Side
No. Name Description
6 Tape seal Remove this tape seal after installing the software.
7 USB connector Used to connect a USB cable.