Specifications of Wireless LAN (iX100)

The following table summarizes the wireless LAN specifications of iX100.

Item

Specification

Product name

ScanSnap iX100

Observed standards

IEEE802.11b/IEEE802.11g/IEEE802.11n

Frequency range

2.412 GHz to 2.472 GHz

Channels

Access Point Connect mode: 1 to 13 ch

Direct Connect mode: 1 to 11 ch

Transfer speed (standard)

IEEE802.11b Max.: 11 Mbps

IEEE802.11g Max.: 54 Mbps

IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz bandwidth) (*1)

Communication mode

Access Point Connect mode (infrastructure) (*2)

Direct Connect mode (access point)

Communication distance (line of sight)

Indoors, 50 m (Recommended: indoors, within 25 m) (*3)

Security

Access Point Connect mode

WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA (TKIP/AES), WPA2 (TKIP/AES), WEP (64-bit/128-bit) (*4)

Direct Connect mode

WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (64-bit/128-bit)

Easy installation

WPS 2.0 supported (button/PIN code) (*5)

*1:

The values indicated on these standards are the maximum value, and do not indicate actual communication speed.

*2:

To use the wireless function, you need a wireless access point that supports the same standards.

*3:

The specifications may vary based on the connected wireless access point and the surrounding environment.

*4:

The following EAP types are supported.

EAP-MD5, PEAPv0, EAP-TLS, EAP-TTLS, EAP-FAST, LEAP

EAP-MD5 is not supported by iX100 if the last six digits of the serial number are "E00001" or later. It is recommended that you change to a more secure security protocol.

*5:

You need a wireless access point or wireless client that supports the WPS function.

HINT

For a wireless access point that cannot disable a privacy separator such as a mobile router or a public wireless LAN, a connection between iX100 and a computer cannot be established.