Uploading a File to a Cloud Service Automatically

This section describes how to select whether or not a received file is uploaded to a cloud service automatically when the ScanSnap Sync function is set to on.

Configure the setting in the following procedure.

  1. Tap Settings Button on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.

    The [Settings] screen appears.

  2. Tap [ScanSnap Sync Setting] in the [Settings] screen.

    The [ScanSnap Sync Setting] screen appears.

  3. Tap the [Auto Upload] checkbox.

    The auto upload option switches to on/off.

ATTENTION
  • To upload a file to a cloud service, an Internet connection must be established.

  • If a large size file is uploaded, it may not be uploaded successfully depending on the cloud service or communication status of the Internet connection. When this is the case, check that the Internet connection is normal. As necessary, scan documents in the following procedure again in order to reduce the size of files to be uploaded.

    • Scan documents more than once to break scanned images into multiple parts

    • Scan documents by setting [Image quality] to a low resolution for [Scanning] in the [Profile] screen

    • Scan documents by setting [Compression rate] to a large value for [File size] in the [Profile] screen

HINT
  • By default, this item is set to on.

  • This can be set only when a cloud service to be synced is selected.

  • The following file can be uploaded:

    • A file that is scanned and received by using ScanSnap Connect Application

    • A file that is received by using Scan to Mobile

  • When [Auto Upload] is set to off, the received file is not uploaded to a cloud service automatically. A file that was received before [Auto Upload] is set to on is not uploaded.

    When this is the case, you can manually upload the file to a cloud service later.

    For details, refer to the following:

    Uploading a File to a Cloud Service Manually