To Continue Scanning
You can continue scanning only when the error message appears in the following cases:
For iX1300
No document was detected in either the ADF paper chute (cover) of the manual feeder.
Paper jam occurred.
The ADF top section or the top cover is open.
The Carrier Sheet, Photo Carrier Sheet, or Booklet Carrier Sheet has been loaded or inserted.
-
You tapped the [Cancel] button during scanning.
A scan was stopped by the paper protection function.
Dirt was detected on the document sensor(s).
Documents have been loaded in the ADF paper chute (cover) and inserted in the manual feeder.
For models other than iX1300
No document was detected in the ADF paper chute (cover).
Paper jam occurred.
The ADF top section or the top cover is open.
A Carrier Sheet or Photo Carrier Sheet has been loaded.
-
You tapped the [Cancel] button during scanning.
To continue scanning, perform the following.
-
Load the remaining pages in the ScanSnap.
ATTENTION
Remove any pages inside the ScanSnap.
-
Tap the [Continue] button to resume the scan.
Scanning resumes.
The scanned image is saved when the scanning is completed.