Specifying the Time for iX100 to Turn Off

If iX100 that is connected directly continues not to scan, iX100 turns off automatically. When iX100 is battery powered, you can specify the time for iX100 to turn off. Specify the time in the following procedure.

  1. Tap Settings Button on the [File List] screen or do the same thing on the folder screen with the ScanSnap Sync function set to on.

    The [Settings] screen appears.

  2. Tap [ScanSnap Information] in the [Settings] screen.

    The [ScanSnap Information] screen appears.

  3. Tap [Auto power off] in the [ScanSnap Information] screen.

    Tap the time.

    The following times are available.

    • 1 minute

    • 3 minutes

    • 5 minutes

    • 10 minutes

    • 15 minutes

    • 1 Hour

    • Never

HINT

When you perform one of the following operations, the specified time for iX100 to turn off is reset.

  • Insert a document in iX100.

  • Start scanning.

  • Finish scanning.

  • Connect the USB cable to the computer and iX100.

  • Disconnect the USB cable from the computer or iX100.