Overview
ScanSnap Connect Application allows you to organize PDF/JPEG images scanned with the ScanSnap in a mobile device, and perform scanning directly with iX1600, iX1500, iX1300, iX500, or iX100 through wireless LAN connection.
With this application, you can receive image data in your mobile device.
In addition, by using the ScanSnap Sync function, you can use the scanned images in ScanSnap Organizer on a computer.
For details about the ScanSnap Sync function, refer to ScanSnap Sync Function.
The image data that is received or downloaded can be sent and viewed in an application that supports PDF/JPEG files.
You can also check the image on the [Preview] screen.
- When connecting a mobile device to iX1600 or iX1500
To use ScanSnap Connect Application on a mobile device that is connected to iX1600 or iX1500 via wireless LAN, you need the following:
Access Point Connect mode
iX1600 or iX1500
Wireless LAN
Direct Connect mode
iX1600 or iX1500
Wireless LAN
Configure the wireless settings for iX1600 or iX1500 on the touch panel.
- When connecting a mobile device to iX1300
To use ScanSnap Connect Application on a mobile device that is connected to iX1300 via wireless LAN, you need the following:
Access Point Connect mode
iX1300
Wireless LAN
Direct Connect mode
iX1300
Wireless LAN
To configure the wireless settings for iX1300, use ScanSnap Wireless Setup Tool installed on your computer.
ScanSnap Wireless Setup Tool will be installed together with ScanSnap Home or ScanSnap Manager.
- When connecting a mobile device to iX500 or iX100
To use ScanSnap Connect Application on a mobile device that is connected to iX500 or iX100 via wireless LAN, you need the following:
Access Point Connect mode
iX500 or iX100
Wireless LAN
Direct Connect mode
iX100
Wireless LAN
To configure the wireless settings for iX500 or iX100, use ScanSnap Wireless Setup Tool installed on your computer.
ScanSnap Wireless Setup Tool will be installed together with ScanSnap Home or ScanSnap Manager.
- When connecting a mobile device to a computer
If you use ScanSnap Manager on a computer, connect a mobile device to a computer to be able to receive images of a scanned document.
To use ScanSnap Connect Application on a mobile device that is connected to a computer, you need the following:
ScanSnap
Scan to Mobile
This application will be installed on the computer together with ScanSnap Manager.
Wireless LAN