Unsure What to Prepare before Setup.

Prepare the following before the ScanSnap Cloud application setup:

  • A ScanSnap model

  • A wireless access point with an Internet connection

    Check the SSID and the encryption key for the wireless access point beforehand.

    Depending on the wireless access point, the privacy separator function of the wireless access point may be enabled. If so, disable the function.

    If there are two types of SSID at 2.4 GHz and 5 GHz, use the 2.4 GHz SSID.

    SSID at 5 GHz and a public wireless access point cannot be used.

  • A valid e-mail address

    This e-mail address will be used as an account name for the ScanSnap Cloud service.

  • A cloud storage service account to save scanned images

    Obtain a cloud storage service account to save images.

    ATTENTION

    Depending on the cloud storage service to be used, the setup may not be completed if you obtain just the account. Log in to the cloud storage service first on an application supported by the cloud storage service or a web browser.

  • A USB cable

    It is required to connect the ScanSnap to your computer.

  • Exiting ScanSnap Manager

    To set up the ScanSnap Cloud application, you need to exit ScanSnap Manager.

    Exit ScanSnap Manager in the following procedure:

    1. Right-click the ScanSnap Manager icon.

    2. Click [Exit] in the right-click menu that appears.