What to Prepare

• ScanSnap iX100

• Wireless access point that supports 2.4 GHz

  ATTENTION

  • Refer to Disabling the Privacy Separator Function on the Wireless Access Point and check that the setting is disabled in advance.

  • SSID at a 5 GHz band and a public wireless LAN cannot be used.

• A mobile device or a computer

  HINT

  If a computer is available, it is recommended that you use a computer for the setup process. Even if you use a computer for the setup process, you can install the ScanSnap Cloud application on a mobile device to use the functions of the ScanSnap Cloud service.

• A ScanSnap account or a valid e-mail address

  Use a ScanSnap account to set up the ScanSnap Cloud service.

  If you do not have a ScanSnap account, make sure that you have an e-mail address to be used as a ScanSnap account.

• Account of the cloud storage service that is to be linked

  When specifying a cloud storage service with the ScanSnap Cloud application, you need to enter an account and a password for the cloud storage service that is to be linked.

  Obtain an account of a cloud storage service that is to be linked in advance.

  ATTENTION

  Depending on the cloud storage service to be used, you may not be able to specify it if you obtain just the account. Log in to the cloud storage service first on an application supported by the cloud storage service or a web browser.